How To Install Windows XP and 7 of the Flash Disk

In general, to install windows 7 and windows xp we use the cd / dvd as bootingnya. However it will be a big problem, if a DVD RW or laptop computer is broken. If the DVD RW is damaged we certainly will not be able to boot windows from cd / dvd. The solution.? Use an external DVD RW, to install windows 7 or windows. That means the first, second way is to use the flash as a boot windows 7 or windows xp, and this is the easiest way. We will use the second way.

Preparation stage to install windows 7 or windows XP from Flash Disk

•  Application WinToFlash, Download
• Flashdisk 1 GB (for booting Windows XP)
• Flashdisk 4 GB (To boot windows 7)

How to boot Windows 7 and Windows XP with Flash Disk

1. Please download WinToFlash, by clicking the download link above. Extract the file then open WinToFlash.exe -> Accept
2. The following display appears, click the check mark -> click Next 
   
3. Insert the Windows XP boot CD or boot Windows 7.
   You can borrow a friend's computer to create a boot windows xp and windows 7
4. Plug the flash 1 GB (If making booting Windows XP), flash 4 GB (If making booting windows 7)
5. Back to WinToFlash. On the Windows file path field specify where the position of windows xp boot cd or Windows 7, and on the field determine where to position the USB flash drive counterparts, click Next. See the picture. 

   
   
   
   Note: "Make sure the contents of the flash has counterparts to move, because the flash will be formatted"
6.  Windows License Agreement appears, check the I Accept ..., click continue.
   .
   
7. The process of copying the boot from CD / DVD to the flash will be running, wait until the finish.
   
8. Okey, Flashdisk is ready to use as a boot

How to Install Windows XP With a Flash Disk

1. Plug the flashdisk that already contains the Windows XP boot, then turn on the computer.
2. Go into the BIOS by pressing F2 when the new computer is turned on, change the primary boot with pendrive (USB-HDD), if the flash has been in plug, there will appear the name of our flash, click F10 to save the settings.
3. Two options will appear when the computer or laptop to boot through the pendrive. First, select 1. .. TEXT SETUP, press Enter, then do the installation as usual.
   
4. After the computer restarts, Select 2. Gui .. Mode, press enter.
   Remember ..! Gui Mode
5. If the computer restarts again, select the Gui Mode ...
6. Continue installation as usual.
7. Please unplug the flash, after a desktop computer or laptop is open 

How to Install Windows 7 With Flash Disk

1. Flash Plug that has been filled windows 7.
2. Go into the BIOS by pressing F2 when the new computer is powered on. change the primary boot with USB - HDD.
3. Install windows 7 as installed by booting the DVD, read how to install windows 7.
4. Only, when the computer restarts, unplug the flash so that computers do not reinstall.
   

I've tried it, if his fellow curious please try. Advantages to install windows 7 or windows XP from the flash is, smaller installation failure rate, and even tends to be faster than installing with CD / DVD.

Owy, please format the flash if you intend to store more data. 

Note :

"Make sure your computer or laptop colleagues to support booting from flash. Usually the old school computer can not boot via flash, please check through the BIOS."

Posted in: Trick